Contour.Next Chair Unit
Contour.Next units are a combination of an ECO.Next chair, a CSM spittoon and a Trionic 5 delivery unit. Most chairs have a joystick control at the rear of the base, for controlling the chair movements. Early models had a disc shaped foot control. Contour units use the large backrest upholstery TD3301#

All Contour.Next units use the Trionic 5S delivery unit which has chair movement controls on the right-hand side of the membrane panel.

Download the Contour II & Next installation guide

Download the Eco19 & Next operating manual
Download the Eco19 & Next upholstery & armrests i.d.

Download the CSM user’s manual. (See CSM page on this site for notes)

Download the User Manual T5S (2008 on)
Download the Technical Supplement T5S (2008 on)

Download the Contour.Next chair wiring diagram
Download the Contour.Next general wiring diagram

Repair of the product must only be carried out by appropriately competent persons. This is particularly important where electrical work is concerned.

Operating light
If the unit was fitted with a factory supplied operating light it would be one of the following;

VisionHalogen operating light
PolarisL.E.D. operating light

Please refer to the separate pages for these lights on the product support pages of this website.

There are many combinations of instrumentation and spittoon options which may be installed. We recommend that you contact Tridac to confirm your requirements before placing an order.